Providing appropriate ventilation and blowing of the boiler can significantly increase the effectiveness of the furnace and thereby save us heating costs. So, let's take the right fan for the stove.

When buying a stove, we usually make complex purchases, supplying ourselves with all the necessary accessories. However, sometimes there is a need to replace, for example, a discharge fan. Assuming that we do not have special knowledge, we adhere to the principle of replacing equipment with another, identical. However, we do not always get the desired effect in this way. Why?

Selection of a fan for the controller
If in case of failure we have no clear reasons for buying a new supervisor of greater power than the previous one, we almost always choose a device with similar performance. However, it happens that after connecting the fan, the controller fails, which entails additional costs. To prevent this from happening, pay attention to the consumption of current or measure it if the manufacturer does not indicate this value. It is also worth checking which current flows when the fan impeller is stopped. After measuring, we compare it with the power of the driver. If it does not exceed the permissible current level, the joint operation of both devices should be possible and effective.

The most important parameters of the stove supercharger
When choosing a injection fan for the furnace, we focus primarily on its power. This is determined by the size of our furnace. The most common are blunting with a capacity of about 70 watts. Efficiency, that is, the amount of air passing through the device per hour is also extremely important. Weaker models reach 250 m 3 / h, more powerful - almost 300 m 3. / h. The standard speed, on the other hand, is about 2300 rpm. The most common temperature range in which fans can operate is from -10 ° C to + 40 ° C, which means that the equipment will work well both in the apartment and in cooler rooms. Depending on the place in which place the plate is operated, its volume may be a very important parameter. Unfortunately, manufacturers often avoid a clear indication of the noise level in decibels, instead preferring unsplained slogans, such as “very quiet work”. This is usually about 65 dB. However, if the furnace works in the immediate vicinity of residential premises, it is worth studying this topic and finding the appropriate parameter. Otherwise, the loud blower will make our life unpleasant.

Optional equipment
All kinds of damper and damper, which are equipped with furnace superchargers, are designed to close the air supply when the device does not work. Thus, an uncontrolled increase in temperature is prevented. Another good practice is to protect the engine correctly. This is mainly a plastic cover that protects against dirt, but also prevents direct contact with moving parts. Thus, we will avoid situations in which we could touch a finger to the working fan. This feature is especially important when there are small children at home. Сайт play2x официальный