Wall mural are becoming increasingly popular. They are an excellent alternative to painting. On the other hand, their location requires accuracy and certain skills. In today's article, we will focus on the following stages of preparation for the salary of walls in the room by wallpaper. Of course, our tips will contribute to the achievement of the desired effect.

Preparation of walls to shook wallpaper
An important element that will help in obtaining the desired wallpaper effect is the preparation of walls. In the event of an inextentive substrate, its surface should be aligned first. All cavities and imperfect stuffed seams must be filled. At the next step, protrusions found on the surface of the walls should be sharpened. In the case of a painted wall, the scope of work, unfortunately, will be much more. Remove its layer from walls stained with chalk or lime paint. Most often it uses a spatula. Before starting work, it is recommended to soak the wall. In the case of enamel and oil paint, its grinding will be the first step. Then you need to assemble the dust layer. Square paint where it starts peeling. A sufficiently convenient way to remove paint residues is the use of a special preparation for old paints and varnishes. On the bases covered with acrylic or emulsion paint, it is best to use water with a detergent or liquid for washing the walls. Preparation of plasterboard walls requires filling of all cavities and plates of stoves. The slots between the boards can be sealed with a special ribbon. After filling the cavities, it is necessary to abded the surface of the wall.

Removal of old wallpaper
Preparation of walls with abtended walls seems much more laborious. As you already guessed, first remove old wallpapers. It is best to impregnate with a wall with warm water with the addition of a small amount of vinegar. You can also purchase a special tool for removing wallpaper. Shipping the wallpaper is best with a spatula. When removing vinyl wallpaper, wipe the surface with a metal brush before soaking them. Due to this, water is much easier penetrated into the adhesive layer. Other types of wallpaper Before wetting should be lost by sandpaper.

Additional Information
Before starting wallpaper pasting, make sure that the surface of the walls are smooth, skimmed and dry. In the case of rough walls, it is recommended to first put a layer of insulating wallpaper. During the day before the start of sticking wallpaper, the base should be braced by a special tool or diluted glue. This lines the absorbency of the base. Best training courses in Australia on Cosmitto by best training providers.