COSTAR PAVER SEALER is a one component sealer and joint sand stabilizer specially formulated to enhance the appearance and life span of concrete, stone and brick surfaces. It is also applied to the joints between pavers to keep the sand in place and prevent erosion or shifting. This product helps secure the sand and prevents it from washing out, which could cause the pavers to loosen over time.
BENEFITS
- Weather resistant
- UV resistant
- Does not yellow
- Free from Oils
- Reduces the risk of water absorption and protects against stains from oil, dirt, and chemicals.
- Effective in terms of cost
- Helps to keep pavers tightly in place, preventing them from shifting or becoming uneven.
- Drastically reduced shrinkage cracks
- Performs excellently well with freshly placed concrete
PRECAUTION
- Do not apply more than the recommended amount.
- Do not leave puddles. If puddles form on textured surfaces, use a brush to remove them.
- When used as a curing compound, do not apply to finished concrete surface too quickly.
- Under typical conditions, the proper application time will be 4-6 hours after placing.
- When used as a curing compound in hot, windy weather, the proper application time will be
reduced to as little as 2-3hours after placing. - Wait at least 10-12 hours in cool weather. Apply after finishing and when surface water has been
reabsorbed.
PRODUCT APPLICATION
For new concrete, application should not start on freshly laid concrete until surface is dry. COSTAR PAVER SEALER should be applied uniformly at a rate of 3 to 5m2 per litre under standard site conditions. In sensitive cases, as in the case of sealing and dustproofing application, double coat might be applicable. Until fully dry, applied film should be free from trafficking and caution should be taken prevent the film from being damaged.